BMW ICOM Next A+B+C With Dell D630 Laptop installed 2016.5 win7 icom diagnosis software
How to Restore ICom Next BMW New generation BMW ICOM Next A+B+C Single Interface Emulator:
Here is the customer solution to obd2tuning.com ICOM Next bmw restore when you has red LEDs turn on issue when running firmware upgrade. In order to solve your incident,please apply the following steps:
Note: DO NOT UNPLUG the obd2tuning.com BMW ICOM Next emulatorfrom the {OBD II} jack after an update via {ISTA}, a web interface or anemergency software update.
The {ICOM Next} starts with flashing green SYSTEM {LED}s. After about 10seconds it shows red {LED}s for about 2 minutes. After this, the {ICOM Next}reboots due to a firmware update.
If the {ICOM Next} {LED}s remain red for more than 10 minutes, or if the {ICOMNext} is unplugged directly after an update, please carry out the followingprocedure:
1. Please ensure that ALL of the following prerequisites are satisfied:
1.1. You require a USB 2.0 or USB 3.0 flash drive. {USB 1.x flash drivesare not supported).
1.2. The USB flash drive must be formatted with a FAT32 file system.
1.3. A minimum of 60 MByte free space is required on the USB flash drive.
2. Navigate to“C:ProgramDataBMWISPIdataTRICICOMNextICOM-Image-03-14-08”.
ProgramData folder is hidden bydefault. In that case, you have two options in order to access the file or thefolder:
– change the settings directly in the Windows Explorer (“Tools =>Folder Options => View => Show hidden files, folders or drives”)
– or enter the whole path into the Windows Explorer’s address bar and pressenter.
3. Copy “{ICOM_Next-rootfs-010002.tar.gz}” to the root directory ofthe {USB} flash drive.
4. Copy “{ICOM_Next-app-010008.tar.gz}” to the root directory of the{USB} flash drive.
5. Disconnect the {ICOM Next} from the power supply.
6. Plug the {USB} flash drive into the {ICOM NEXT}.
7. Press and hold the button pressed on the {ICOM Next} and connect the {ICOMNEXT} to the {OBD II} jack of a vehicle.
8. Keep the button pressed. The {ICOM NEXT} starts with all {LED}s glowing red.The {LED}s stay red; some may flicker orange/yellow. Keep the button pressed.
9. Keep the button pressed. After about 4 seconds, all {LED}s turnorange/yellow. All {LED}s now glow in the same colour.
10. Release the button and then press it three times within five seconds. The{LED}s glow or flash red and orange/yellow again.
11. Wait: This procedure may take several minutes. Do not disconnect the {ICOMNEXT} as long as any {LED} glows red.
12. After about 5 minutes the SYSTEM {LED} turns green again. The {ICOM NEXT}has been updated and is ready for use.
IMPORTANT: When the software update is complete, the {ICOM NEXT} needs to beconnected to the dealer’s network in order to be reconfigured.
All previous settings are lost during the update. If there is a“{user.settings}” file on the {USB} flash drive, it will be appliedafter the firmware update.
Free download bmw icom next firmware:
ICOM NEXT firmware 3.14.10:
https://mega.nz/#!uZ0XgTbB!0pW25mgpiUuhB2K5gBIxw9O-Yj65aQ1Jh50RdKAD4Is
ICOM NEXT firmware 3.14.08:
https://mega.nz/#!D0cwTTzb!LCeRki-jObvuV9m6UaRsxiGCuHlwv-u33ShJO4ZGXaQ
ICOM Image 03.14.08 (Application image+ Firmware image+ ICOM NEXT app .tar.gz+ ICOM NEXT rootfs. tar.gz)
https://mega.nz/#F!zZUXiYpI!H9-RKjfqd4Mjk9EoWMlxLw
OBD2Tuning.com Focus on OBD Tool Since 2008
https://www.facebook.com/obd2tuning/
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.
沒有留言:
張貼留言