China Icom a2 clone Chinese BMW ICOM A2 B C Firmware upgrade guide

As we all know that the China Icom a2 clone is china bmw icom update version. Chinese BMW ICOM A2 B C work on latest ISTA/D ISTA/P software. Below OBD2Tuning sharing China Icom a2 clone Chinese BMW ICOM A2 B C Firmware upgrade guide. 

China ICOM A2 Clone Super Quality BMW ICOM A2 B C diagnosis



China Icom a2 clone Chinese BMW ICOM A2 B C Firmware upgrade guide:

1). Use your cable and connect BMW ICOM to port
2). Power ICOM by 12V power adapter or from 1x DLC
3). Use your browser (IE) and browse 169.254.92.38:60080/
User name: root
Password: NZY11502
4). Click "Update Firmware",and you can find the version of firmware.
5). Select ICOM-BootImage-XX-XX-XX.bin, set image type to "SYSTEM",
click "Send the file"
6). When it will say "Write the image file to the flash?", click "Yes",
then the ICOM led it will been RED
7). When it will say "The SYSTEM IMAGE update was successfull",
click "Update Firmware"
8). Select ICOM-ApplicationImage-XX-XX-XX.bin, set image type to "APPLICATION",
click "Send the file",the file is big so it will take some minutes to finish have patience.
9). When it will say "Write the image file to the flash?", click "Yes",
then the ICOM led it will been RED again
10). When it is ok, click "reboot".
                                 
This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2 ECU chip tuning tool Center.